Tutorials

How to enter the VTR Router – Step by step

In general, the instructions for each model explain in detail the procedure to follow to install and make the relevant adjustments.

But, in some cases they can be a bit confusing, so here we will see step by step how to install, enter the Router section and configure it.

Install the router

Before being able to enter the VTR Router, it is necessary to correctly install it, especially if it has just been purchased.

Now, the first thing to do is connect or plug the equipment into the outlet. Next, you need to locate a network cable.

To be able to connect it from the “ WAN ” or “ Internet ” input of the Router with the VTR Modem. In general, this point is separated from the others and is of another color.

The computer can then be connected through the other inputs, and with a different network cable.

Learn to enter the VTR Router!

First of all, you must look in the manual of the device for the address or URL that allows access to the “Settings “.

In addition, it will also be necessary to have at hand the username and password that comes default or from the factory for the equipment in question.

It is worth mentioning that usually the URL is the same, this is “http: //192.168.XX “, the “X ” being changed by numbers according to the brand of the Router.

blue wired router

 

After having this data, proceed to open the browser of choice, and copy or write the link in the search bar. Then press the “Enter ” key .

In this way, to be able to access and continue with the configuration, authentication will be necessary, so we will enter the username and password that we already have on hand.

Configure the router You can do it yourself!

Having correctly entered the configuration page of the equipment, we proceed to establish the parameters and adjustments that will limit and ensure its correct operation.

Going or opening the menu is the next thing to do, in order to enter the tab called “ Quick Setup ”, “ Wizard Setup ” or “ Connection Configuration ”, everything will depend on the brand.

In the new section, you will choose to configure the “Dynamic IP “, “Automatic DHCP ” or “DHCP “, they are the same option, they can simply be presented with different names.

Network name and password

The next thing is to establish the name with which you want the network to present itself, for this, you will only have to fill in the relevant field.

Before continuing, it is recommended that you do not use special characters, such as the letter “ Ñ ”, accents or symbols, as this could affect the connection time. Regarding the channel, the “ Auto ” mode will have to be chosen .

Consequently, the security option that the wireless network will apply can be set. It is always recommended to use “WPA ” or “WPA-2 PERSONAL “.

 

The access code that is established must be written in the field indicated for that, and leaving out the special characters already mentioned would be ideal.

original router

Whereas, creating a password based on uppercase letters, lowercase letters and numbers combined will be the best.

Finally, locate and press a button called “Reboot “, which will restart the Router. So it may take a while.

Connect

At the end of the process of entering the VTR Router and configuring it correctly, you can use the wireless connection normally. To handle your device well it is important to know its brand and model and to know its hardware and software components.

You will only have to access the networks section of the device to connect, to be able to locate through the name that we have placed, and proceed to enter with the password.

In this way, you can use the Router both with this mode, and with the wired connection that was made at the beginning.

Having Internet via Wifi is now something essential for the day to day, either at work or at home; That is why a good fast and long-range Wifi is very necessary, that is why you should know that you can turn your router into a Wifi repeater.

As we mentioned before, a router is very necessary to be able to enjoy the internet and Wifi, that is why it must be protected from computer attacks.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button