How to create and configure a home guest network step by step

Therefore, it should be noted that this procedure can be implemented in almost all routers as well as configured as a wireless modem . In addition, with this option it is possible to ensure that the main network is in a secure way, since other devices will not be able to access it.

Steps to create and configure a guest network

It should also be noted that this procedure can also limit the bandwidth of the guest WiFi network that has just been created. Considering that it can only be applied on some routers, this way the devices will not work slowly.

Planet, blue background

Similarly, when creating the Wi-Fi network for visitors, you can put a short password or a name that you can always keep in mind. Since few will have access to it and it may be easier to remember it.

Each of the steps that must be performed in order to create and configure the network and connect easily will be explained below . In addition, the user must take into consideration that the routers depending on the model are different, for this reason the process may vary a bit.

Initially, the highlighted router can be accessed by copying and pasting the following code in the address bar: Then you have to enter the personal data of the router such as the user and their respective password.

Later, depending on the router, you can find the settings option or the wireless advanced section appears in some of them . Once you enter, you must look for the option “network for guests”, from this section you can create the network by adding the password you want.

Importance of having a guest network

Remember to enter an easy password, it is recommended that it has WEP encryption so that it is easy to remember it. Next, if a section with the intranet block is displayed, it is preferable that it be marked. Therefore, the guests will be able to access the other devices that are connected to the network.

Configuration options for networks

So by having everything configured, you can turn on the guest Wi-Fi every time friends or family arrive at your house. Otherwise, when there are no guests at home, you can turn it off, so you will prevent someone from trying to hack it.

Once it has been created, the two main characteristics can be taken into account in the guest settings. Which can be activated if you want to “allow customers to see each other”, so users or family members can search and share information.

From the guest network you can access a device that is connected to the local network, to do this you have to check the “allow users to access the local network” box. So you can implement the settings you consider necessary and press the “save” option.

With these simple steps you will be able to create and configure the guest network in this way you will avoid putting the main network at risk. Which is the one you usually use and to which you have a variety of equipment connected at home. In short, the Wi-Fi network for guests is the best alternative when you have internet at home. In this way you can always have the primary key secure.

Finally, we hope that this information has been useful to you. However, we would like to hear from you. Have you been able to create and configure a guest network by following these steps? Know another way to set up a guest network? Leave us your answers in the comments.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button