Tutorials

How to activate the connection of my USB port if it does not work or gives an error

If you have wondered how to activate the connection of my USB port ? If it does not work or gives an error when connecting a device, here we will explain what you can do to solve this problem and that you can connect any peripheral to your computer.

USB technology came to revolutionize the world of computing, which was long in search of a connector that would be the standard worldwide, so as not to have incompatibility problems in electronic equipment. Also, USB technology has come a long way over the years, so the difference between USB version 2.0 and 3.0 is abysmal in terms of speed.

First method to activate my USB port connection

One reason why the USB connection in any of the ports of your computer may be disabled is that it has a problem with the drivers that control it, so you should always verify that they are updated and that they are enabled.

For this we must stop on the start menu icon and right-click, a list with several options will appear, where we must look for one that says ‘devices’ and click on it. Then we will load a window in which we will have all the devices installed, from the video to the audio ones.

If we look closely, we will also find those intended to control the USB ports. If we right-click it, we may notice that there is an option to check for updates to the driver. In the same way, we will have the option to both disable and enable. 

activate the connection of my usb port

If on the other hand it is enabled, then we can try looking for updates, this can also help us in case we have USB that works slowly.

Second method to activate my USB port connection

Another reason why you may have problems with a USB port is the poor connection of a USB extension , since these are designed to lengthen or take the USB connection to difficult places, this is done through a cable that connects to any of the ports. But if these are misused or have a poor connection, it may appear that the port is down.

One more reason why USB ports can be affected is by a virus that disables their controller, so it is important to be careful what memories we put in our PC, since these viruses are generally difficult to eliminate. If you have an antivirus program you can do a scan to rule out this option.

The USB ports, being exposed to the environment, tend to fill with dirt, which can obstruct the entrance of the cable that we are connected to, so you can periodically clean them, using compressed air.

Finally and a little less frequently, your USB port may have been burned or physically damaged, if this is the case, you will not be able to connect any device and you will have to use a ‘Hub’ to expand another port. This usually happens when we try to draw electricity from the USB port and it is not done correctly.

Third method to activate my USB port connection

As a last alternative, we can try to restart our computer, because this can help us so that if the problem was a controller, it will load again and any type of error is eliminated. 

my usb port does not work gives error

 The correct way to do this is the following, first we must send to turn off the equipment. Once it is off, we must completely disconnect it from the electrical current, so that there is no way for electricity to enter it, in case of using a laptop, we must also remove the battery.

Then we must press the button with which we turn it on for about 10 seconds, this will cause the internal components to discharge, and that they can obtain new and clean current. This can also help us in cases where they are overloaded or have static.

Once we complete this, we can reconnect everything and turn on our equipment, if everything has gone well, you should no longer have problems using any of your USB ports.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button