BlitzWolf-BR2 Bluetooth Receiver: Make Devices Wireless

Connect all your devices with a single receiver

The BW-BR2 is a BliTZWOlF brand device. It is a wireless receiver that works with Bluetooth technology. It is compatible with Android and iOS devices.

Its design is simple and at a glance it is easy to use. BliTZWOlF is recognized for offering very good quality products and its support system is characterized by offering quality assistance to users. The BW-BR2 bought in official stores offers a guarantee of 18 months.

Connect multiple devices with Bluetooth

Description of the BW-BR2

The receiver only button design has only on / off button. When it is in operation, a small flashing led lights up. It has a built-in microphone that can be used to make calls.
the device’s battery is 180mAh, that is, it works 10 hours of continuous operation.

The charging duration time is approximately one and a half hours. The range covered by the BW-BR2 is 9 meters. It works as a receiver and transmitter and supports up to two devices connected simultaneously .

It has a 3.5mm plug port to connect headphones or to connect auxiliary cables. The micro USB port is used to charge the device. In addition, it has two buttons with which you can lower or increase the volume. You can even change the song from the connector if you are listening to music.

The BW-BR2 packaging includes

  • 3.5mm to RCA auxiliary cable
  • USB to micro USB cable to charge the receiver
  • Small 3.5mm to 3.5mm cable
  • 3.5mm to 3.5mm connector
  • User manual

Make devices wireless

The number of uses that can be put into the BW-BR2 is unimaginable from the first impression alone. Being such a small device, it becomes indispensable in everyday life. It is very easy to turn a device into wireless with the connector.

  1. You just have to turn on your phone and enable e l Bluetooth
  2. Turn on the BW-BR2 receiver
  3. Identify the BW-BR2 and establish a connection between both devices via Bluetooth
  4. When the device and the phone are paired you can connect the headphones to the BW-BR2

Now you can listen to music on your new wireless headphones. Best of all, the sound quality is not affected by the use of the receiver. You could listen to 8D music   with the headphones and keep the quality of the experience the same.

If you already have wireless headphones you have the possibility to connect them to other devices such as a PC , a TV or an Ipod with the BW-BR2. Connect it to the TV and it will work as a transmitter. Watch a movie without noise and interruptions and even connect up to two wireless headphones at the same time.

Make devices wireless

Connect the receiver to your vehicle or a speaker and synchronize it with your smartphone to have access to your music wherever you are. The advantage of using a single small to connect so many devices is that you can take it anywhere and in any corner of the house.

New versions of BliTZWOlF devices

Currently there are more recent versions such as the BW-BR3 and the BW-BR4. The BW-BR3 offers USB, AUX and SPDIF compliant connection interfaces. It is compatible with Bluetooth 4.1 technology like its predecessor and its battery has an estimated duration of 8.5 hours.

The BW-BR4 has an incredible range of 100 meters and its battery lasts up to 17 hours of continuous use. The connection interfaces available are USB, AUX, RCA and SPDIF. Unlike the previous ones, the BW-BR4 is compatible with Bluetooth 5.0 technology.

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button