Windows

How to optimize the performance of a slow SSD in Windows 10, 7 and 8? – Step by step guide

However, today the best of the best is found in the SSD or solid state hard drive. These hard drives do not use a magnetic disk to store the information, but a non-volatile memory similar to that of a pendrive. Best of all, you can easily install your SSD hard drive on your PC .

Compared to traditional hard drives there is a considerable increase in speed in a computer. But, it is usual that over time they can get a little slow. When this happens, you can optimize it by following what we are going to tell you next.

ssd optimization data

What you need to know before

It is possible that you have bought an SSD, and that this same one is giving some problems. It is usual that with certain parts of computers you can have a decrease in performance, but with the technology that exists with SSDs it is not something very usual.

Actually, it is because there are many things that can go wrong with how it works on your computer. And, although they are small details, if you take care of them you will greatly improve the life of your SSD considerably.

Given this, if you have Windows 10, you may want to do a couple of things before starting with the small optimizations. The first is that you update the firmware of your SSD so that it can work perfectly. This can be downloaded from the manufacturer’s web portal.

And, on the other hand, you should check your SSD settings in the BIOS and change it to AHCI if it is in IDE, which is a mode that can seriously affect the overall performance of the SSD even with the smallest task.

ssd on table

Performing optimizations

Now that you have a little clearer what you should do in Windows 10 to be able to optimize your SSD, there are other optimizations you can do to improve the performance of the SSD. First, we can talk about hibernation.

When we talk about hibernation, we are talking about a way in which your computer saves the last session to start it as is. This can be very effective with a normal hard drive but with an SSD a lot of life can be lost due to write cycles .

In this case, open a command window and enter “powercfg.exe / h off”, press Enter and you’re done.

On the other hand, it’s good to get rid of Superfetch. This is a process through which programs are preloaded so that they start much faster. However, when using an SSD it may not be as good because write cycles are used and it also saves RAM in our computer.

In order to remove Superfetch, go directly to the start menu and go to “Services “. Here you should run as administrator and look for the “Superfetch ” option to disable it.

When it comes to saving write cycles, it’s also a good idea to turn off storage drive indexing . It is really easy to do; just go to My Computer, and where your SSD appears, right click and enter its properties. Then, just uncheck the bottom box that talks about drive indexing.

Leave a Reply

Your email address will not be published.

Back to top button