How to fix error 0x80070035 network path not found in Windows?

Fix error 0x80070035 network path not found in Windows

You have to keep in mind that there are several solutions for the problem, so open to divide them so that you understand better. The first is to check the sharing settings, to achieve that you must go to the unit you want to access and right-click, so a drop-down will appear where you must select in “Properties”.

From there go to “Share”, if the network route is not shared, then there is an error, so you must press the “Advance sharing” button, this will take you to another section, where you must enable the ” Share this folder ”and also write the name of the unit (C, D), when you finish click on“ Apply ”and then“ OK ”.

alternate windows logo


Finally press the Windows + R key combination to get the run box, in it write the name of the folder and hit enter, if everything went well, you should be able to access and the problem will be solved.

Check device manager

If you still have not been able to fix the ‘ error 0x80070035 the network path was not found in Windows ‘ then it is time for you to apply another solution, the following is to check the device manager.

If you want to achieve it, you must go to the Windows start button and right-click on it, in the list that will appear select “Device Manager”, then choose the “View” option found in the console menu bar.

This action will allow you to choose the “Show hidden devices” section, there you will find at least 6 network adapters, delete all of them except the one that best suits the device in question, then restart the PC. With that there should be no more error.

Add IPv4 protocol over TCP / IP

Another method that also works as a solution for the failure is to add the IPv4 protocol, to achieve this, you must hit the Windows + R keys, that will make the execute box appear, in it write ncpa.cpl and hit enter.

black keyboard


That will show you your connection, when you see it, right click on it and choose “Properties”, in this other section you must enable the box called “Internet Protocol (TCP / IP) version 4″, then click on the ” Install”.

Then, press the option called “Protocol” and click “Add”, that in turn will open another tab where you must choose “Reliable multicast protocol” and click “Accept”, with that the problem should be solved and not return to happen.

And voila, with the last thing you read you should be able to fix the error, so the question How to fix the error 0x80070035 the network path was not found in Windows ?, is already solved.

Remember that there are other ways to intervene in this problem, so if none of the above works for you (which they should), you just have to find another and apply it. In case of other errors such as error 0x80040154 in Windows 10 , they will have different solutions as well.

Leave a Reply

Your email address will not be published.

Back to top button