Is your Windows 10 running a little slow? It is not surprising. This operating system has been widely criticized because after a while it begins to behave in this way, making you believe that the fault is in the performance of your computer and not in the software. However, it is not necessary to perform a hard reset to recover the processing speed, it is enough to optimize it in a certain way so that everything returns to normal.
This Microsoft operating system is a program that regulates and manages tasks from the moment you turn on the computer. This checks the hardware and software of the equipment, to verify its status and operability. If Windows is not optimized, it starts to slow down your computer’s performance; it starts to process everything slower, executes tasks inefficiently and conflicts with the applications appear. Those are the first signs that the operating system is about to crash.
That is why in this tutorial we will teach you all the tricks on how to accelerate Windows 10 to the maximum and optimize the performance of your computer by making a few adjustments you will be able to boost all the resources to 100%, so make the most of these useful tips.
20 tips and tricks to speed up Windows 10 and improve your computer’s speed and performance
The annoyance of thousands of users regarding the performance of Windows 10 is no secret to anyone because its boot process is very slow. In the worst case it even takes several minutes. But this is the least of the problems because if you continue using it like this, everything will get worse and worse ; You will crash in the middle of an important task and make it virtually impossible to work at ease on your computer, so you need to take action as soon as possible.
Here I will tell you how to fix operating system problems, getting you to get speed improvements . Everything you wanted to know is in this step-by-step guide, so let’s not waste any more time and get down to business.
Maximize processor performance
If you are using a desktop PC, you can optimize its CPU performance by changing its power options . Right-click the Start button in the lower left corner of the desktop ( or Windows key + X ) and access the “Power Options ” menu . On the visually displayed screen, click the “High Performance ” button.
How can this help you? Easy. The default system configuration sets certain limitations to prevent the computer from consuming too much electricity, which means that the processor will not perform at its best. It’s a way to “muzzle a Rottweiler.” So when you remove said “muzzle” the beast will roar again and you can fully enjoy all its power.
Pinning on desktop searching for files
One of the most powerful features is the “File Explorer”, which is nothing more than the ability to save searches. The visual displays a saved query that identifies all the Word documents in a specific folder.
When you have a lot of .doc files, for example, it’s a convenient way to search for files of the same nature. But this is even more convenient if this search is in the Start menu, as this way you can find it even faster.
If you want to take advantage of this, open the “File Explorer” and navigate to your “Users” folder and then to the “Searches” subfolder . Right-click on the saved search and place it in the start menu for easy access.
Learn how to limit the reach of Cortana
Microsoft wants you and your personal assistant, Cortana, to use Bing as your default search engine instead of Google. You can force this tool to use a different search engine, but you must first change your default web browser .
If Mozilla Firefox is your default browser on Windows 10, then Cortana should use Google Search. If Chrome is the default browser, you must install the “Chrometana” extension and change the default values. If you don’t, you’ll learn that Cortana is particularly stubborn and will continue to use Bing.
If you want to change Cortana’s behavior even more, you can limit the search parameters. For example, it is possible to tell Cortana not to connect to the internet . To apply all this that we mentioned, you can do something very simple.
- Click the search box for “Cortana ” on the taskbar.
- Then go to the “Cortana Settings ” screen , as shown in the image above.
- At the bottom you should find a setting that says “Search online and include web results .”
- By switching to “Off”, Cortana will no longer display web results, regardless of the search engine used by default.
Enjoy OneDrive Fetch
When you create a Microsoft account , one of the benefits is getting access to OneDrive cloud storage at no cost. But a little-used feature called Fetch can give you even more benefits (but this does not apply to OneDrive for business) .
- Right-click on the OneDrive icon and select “Settings . “
- On the next screen, select the “Settings” tab to access the screen shown in the image above.
- Look for the checkbox called “Let me use OneDrive to collect all my files on this PC .”
This tool not only allows you to improve the performance of the operating system, but you can also make backup copies to save the most important information within your hard drive in the cloud, so that you can access it whenever you want and even restore it in the cloud. computer after a hard reset .
Change the location where apps are installed
Many computers today are equipped with a combination of SSDs and high-capacity mechanical drives. It’s a good idea, but it requires a bit of administration, especially when it comes to the installation location of new applications.
In most cases, you will want the newly installed apps to be on the mechanical drive, and not the bottom boot SSD.
To change the default drive for installing apps do the following:
- Click on the Start button and follow the path “ All applications> Settings> System> Storage .
- You should see a screen similar to the one shown in the image above. On this screen, you can change the default locations for apps, documents, music, photos, video, and just about any file that is stored on your computer.
Create a custom shortcut folder
If you use the Windows 10 Start menu to access your apps, the following suggestion is for you. You can create a custom “Start Menu ” folder that contains shortcuts to applications, documents, and so on. that you use regularly. Then you can pin this folder on the Start screen or on the taskbar.
Start by opening the “File Explorer” and navigate to this folder:
C: \ Users \ XXX \ AppData \ Roaming \ Microsoft \ Windows \ Start Menu \ Programs
In the Programs folder, you can add your own subfolder. In the example, the folder name is “A_Custom_Start_Folder”, so it will be shown to you in the “A ” section of the Start menu. You can put in this the shortcuts you want.
Hard drive storage is less expensive and limited than in the past, but that doesn’t mean you want to waste space. If you have upgraded Windows 10 from Windows 7 or Windows 8 , you probably have a folder on your hard drive that contains the older version of your operating system. In the event that you never go back to it, you can delete the information on it and save some storage space on your hard drive.
- To delete the folder, open the “File Explorer “, go to the hard drive where Windows 10 is installed (usually it is in the C drive) and right-click.
- Now click on the menu item “Properties” to access a screen similar to the one shown in the image above.
- Then click the “Clean disk ” button to start the scan, then click the “Clean files ” button on the system.
Manage Windows Update for performance
Windows Update, believe it or not, sucks up resources when it runs in the background . Fortunately, you can set it to run only at specific times, such as when the device is not running, which means it won’t reboot while you’re in the middle of some important task.
To configure the update to run at specific times, type ” Windows Update Settings ” in the search bar and run the configuration utility .
In the “Update parameters ” section , select “Modify active hours “.
You can change the active hours in this menu . I advise that you change to a time period when the computer is on, but it is not used.
Of all the applications that claim to improve performance, no program does better than a RAM disk. A RAM disk program creates a drive using physical RAM, which is obscenely fast. Users move parts of essential software to RAM disk, resulting in huge speed gains.
The configuration of a RAM disk only requires downloading and installing “Dataram RAMDisk” . After running the software, you need to configure it with the following options.
- To recap, you need to choose the maximum size of the RAM disk, which is about 1GB. You can use any size, but a smaller capacity limits its usefulness.
- Also, check the box for “Set Disk Label” .
- This way, you can identify the disk in the next step. Then select “Start RAM Disk “.
- The next step is to configure your browser to read and write cache files to and from the RAM disk.
- First, right-click on your web browser’s shortcut and select “Properties ” from the context menu.
- Windows 10 makes it easier than ever to access a browser shortcut. You can do it directly from the taskbar.
Under “Properties”, select the “Shortcut ” tab . Then, inside the target text input field, add the following code to the end of the text, where “R ” is the letter of your own RAM disk drive:
The full line of code should look something like this:
“C:} Program Files (x86) \ NGoogleChromeApplicationChrome.exe” –disk-cache-dir = R: \ N-
Your own code may vary, depending on your Chrome settings . Finally, select OK and restart the browser. From now on Chrome will read and write cache files to RAM disk.
The registry keeps a manifest of the settings of Windows and other programs. Over time, thousands upon thousands of registry modifications slow down system performance. A registry cleaner removes those changes . Download updated CCleaner . this will be your computer’s best friend.
Remove unnecessary apps
Generally, when you buy a new computer, it comes with many pre-installed applications that you do not need, including the usual software and tools that you never use and that will only waste space and resources on your computer.
- Open “Settings “.
- Click on “Apps . “
- Then in “Applications and features “.
- Select the application you want to remove and click the “Uninstall ” button .
Check for malware on your computer
Viruses, spyware, adware, and other types of malicious programs are known to take up large parts of processor, memory, and disk resources, rendering the device unusable.
You can use Windows Defender Antivirus to scan and remove malware from your device. To do this you must open Start. Find the “Windows Defender Security Center ” and click the top result to open the experience. Then click on “Virus and threat protection “. Take a scan to rule out threats
Disable visual effects
This system offers a large number of visual effects, from animations and shadows to more sophisticated effects. But that lowers the performance of the team.
To disable animations, shadows, soft fonts, and other effects:
- Open the “Control Panel .”
- Click on “System and Security “
- Then in “System “.
- Then click on the link “Advanced configuration” of the system from the left panel and follow the steps that the wizard shows you.
Restart the computer
Alternatively, if nothing seems to increase performance, you can reset the device to start up again with a clean copy of Windows 10 to improve startup and shutdown, battery life, and overall performance.
- Open “Settings” . Click on “Update & Security .”
- Then in “Recovery “.
- Under “Reset this PC”, click the “Start” button .
- Click the “Save my files” button . You can also click the “Remove All” button to erase everything and install a clean copy.
- Review the apps that will be removed and click “Next . ” And then what you have left is to reset the equipment .
Free up space
This is a very simple way to clean your computer and improve its performance considerably. To do so, you simply have to follow these steps:
- Go to the “Control Panel “.
- Select the hard drive .
- Press the right button of the mouse and a window appears in which you must click on “Free up space “.
Prevent programs from loading at startup
It is common for most Windows users to have applications loaded on their computers when they start up. Go to Start, search, type Task Manager, a window will appear and you will select the programs that you want not to load at startup.
Use the built-in troubleshooter
With the release of the Creators Update, Microsoft has started providing a dedicated section for various troubleshooting utilities.
You can visit: Settings> Update and recovery> Troubleshooter .
Improves Windows graphics performance
Go to Settings> System> Display . Scroll down and click on “Graphics Settings .” On the next screen, select the classic or UWP app you want to configure and click “Add .”
Delete temporary files
They are files that are created when applications are opened. What you should do is close all the programs. Press WINDOWS-R on your keyboard to open the “Run ” window .
Type “% TMP% ” and click “OK .”Guides and Tips Microsoft